diff --git a/NEXT.md b/NEXT.md
index 03cea3c..3417d0b 100644
--- a/NEXT.md
+++ b/NEXT.md
@@ -46,7 +46,7 @@ reader ✅ → parse ✅ → load ✅ → check ✅ → emit ✅ → clang ✅
 | `runtime/flan_dev.c` | **dev only: the by-name registry a run-time-new name needs** |
 | `vendor/raylib/` | **the raylib package: `raylib.flan`, `shim.c`, `link`** |
 | `vendor/agent/` | **the dev agent: a socket, a loader thread, install at a frame boundary** |
-| `emacs/` | **`flan-mode.el` and `flan-dev.el`: the editor half of the dev loop** |
+| `emacs/` | **`flan-mode.el`, `flan-dev.el`, `flan-repl.el`: the editor half of the dev loop** |
 | `sand-sim/` | **the falling-sand simulation, with no raylib in it** |
 | `bin/main.ml` | `flan read \| parse \| check \| emit \| build \| run \| reload \| dev` |
 | `test/test_flan.ml` | reader, parser and checker |
@@ -687,6 +687,7 @@ of the protocol choice: `prin1` writes a request and `read` reads a reply.
 | `C-x C-e` | the expression before point, evaluated *in the running program* |
 | `C-c C-z` / `C-c C-q` | connect (finds `.flan-dev.sock` upward) / disconnect |
 | `C-c C-o` | the running program's own output, in `*flan-output*` |
+| `C-c C-r` | a prompt on the running program (`*flan-repl*`) |
 | `C-c C-d` | what the running program currently defines |
 
 `C-c C-k` sends one module rather than a form at a time on purpose: a `defvar`
@@ -802,11 +803,39 @@ The test that matters is the same expression twice: the fixture increments
 `ticks` every frame, so two evaluations must disagree. A value computed in the
 compiler, or read out of a copy of the program's state, would not.
 
+### The REPL buffer
+
+`flan-repl.el` is a `comint-mode` buffer whose every line goes through the same
+`eval-expr` request `C-x C-e` uses. No new protocol and no compiler support.
+Deriving from `comint` rather than hand-rolling a prompt is the same call as
+deriving `flan-mode` from `lisp-mode`: history, the input ring and kill/yank
+already exist. There is no subprocess behind it — the "process" is a stub
+comint needs in order to have a prompt at all.
+
+Three things about it that are decisions:
+
+- **It is program-scoped.** A name typed at the prompt resolves against the
+  running program's top-level namespace, so in sand you write `sim/settle` and
+  not `settle`. A buffer visiting a package's own file gets the alias applied
+  for it because the file says which package it belongs to; a prompt has no
+  file and nothing to derive one from.
+- **RET on a half-typed form opens a line instead of sending it.** Balance is
+  checked with the Flan syntax table, so a paren inside a string does not
+  count.
+- **A value and the program's output are different things and arrive by
+  different routes.** The value is the result of the request and appears at the
+  prompt; anything the program printed while evaluating it rides along on the
+  same reply and goes to `*flan-output*`. Showing them in one place would be
+  convenient and wrong, so there is a test for the separation.
+
+That test is what caught a real bug: the renderer's `Unit` case emitted `()`
+without evaluating the expression, so `(print-line "x")` — the most ordinary
+thing anyone types at a prompt — answered `()` while nothing happened. A Unit
+expression is almost always a call made for its effect, and is now evaluated
+and *then* reported.
+
 ### What is left
-- **A REPL buffer.** `C-x C-e` echoes into the minibuffer; there is no prompt
-  to type at and no history.
-- **Printers beyond the scalars.** See below — a struct, an `(Option T)` or a
-  slice of structs still refuses by name.
+- **Editor comforts**: completion, eldoc, jump-to-definition, error overlays.
 
 **Session identity is the daemon that owns the build.** A session's struct
 layouts and global types have to describe the memory of the process it is
diff --git a/emacs/flan-mode.el b/emacs/flan-mode.el
index e5287df..1b3caf8 100644
--- a/emacs/flan-mode.el
+++ b/emacs/flan-mode.el
@@ -18,6 +18,7 @@
 (declare-function flan-disconnect "flan-dev")
 (declare-function flan-describe "flan-dev")
 (declare-function flan-show-output "flan-dev")
+(declare-function flan-repl "flan-repl")
 
 (defgroup flan nil
   "Editing and evaluating Flan."
@@ -78,6 +79,7 @@
     (define-key map (kbd "C-c C-q") #'flan-disconnect)
     (define-key map (kbd "C-c C-d") #'flan-describe)
     (define-key map (kbd "C-c C-o") #'flan-show-output)
+    (define-key map (kbd "C-c C-r") #'flan-repl)
     map)
   "Keymap for `flan-mode'.")
 
diff --git a/emacs/flan-repl.el b/emacs/flan-repl.el
new file mode 100644
index 0000000..340c09b
--- /dev/null
+++ b/emacs/flan-repl.el
@@ -0,0 +1,128 @@
+;;; flan-repl.el --- A prompt for a running Flan program  -*- lexical-binding: t; -*-
+
+;; A buffer to type expressions at, sent to the program `flan dev' is running
+;; and answered with the value they had *there*.  It adds no protocol and no
+;; compiler support: every line goes through the same `eval-expr' request that
+;; C-x C-e uses.
+;;
+;; Derived from `comint-mode', for the same reason `flan-mode' derives from
+;; `lisp-mode': history, the input ring, and kill/yank behaviour already exist
+;; and are not worth rewriting.  There is no subprocess behind it — the
+;; "process" is a stub comint needs in order to have a prompt at all.
+;;
+;; Two things about it that are decisions, not accidents:
+;;
+;; - **It is program-scoped.**  A name typed here resolves against the running
+;;   program's top-level namespace, so in sand you write `sim/settle' and not
+;;   `settle'.  A buffer visiting a package's own file gets the alias applied
+;;   for it, because the file says which package it belongs to; a prompt has no
+;;   file and nothing to derive it from.
+;;
+;; - **A value and the program's output are different things** and arrive by
+;;   different routes.  The value of the expression appears at the prompt;
+;;   anything the program printed while evaluating it goes to *flan-output*,
+;;   riding along on the same reply.  Showing them in one place would be
+;;   convenient and wrong.
+
+;;; Code:
+
+(require 'comint)
+(require 'flan-mode)
+(require 'flan-dev)
+
+(defcustom flan-repl-buffer "*flan-repl*"
+  "Name of the Flan REPL buffer."
+  :type 'string
+  :group 'flan)
+
+(defvar flan-repl-prompt "flan> "
+  "Prompt shown in `flan-repl-mode'.")
+
+(defvar flan-repl-mode-map
+  (let ((map (make-sparse-keymap)))
+    (define-key map (kbd "C-c C-o") #'flan-show-output)
+    (define-key map (kbd "C-c C-d") #'flan-describe)
+    (define-key map (kbd "C-c C-q") #'flan-disconnect)
+    map)
+  "Keymap for `flan-repl-mode'.")
+
+(define-derived-mode flan-repl-mode comint-mode "Flan-REPL"
+  "Type expressions; they are evaluated in the running program.
+
+\\{flan-repl-mode-map}"
+  :syntax-table flan-mode-syntax-table
+  (setq-local comint-prompt-regexp (concat "^" (regexp-quote flan-repl-prompt)))
+  (setq-local comint-prompt-read-only t)
+  (setq-local comint-input-sender #'flan-repl--send)
+  ;; Nothing is echoed back by a process, because there is no process.
+  (setq-local comint-process-echoes nil)
+  (setq-local font-lock-defaults '(flan-font-lock-keywords)))
+
+(defun flan-repl--complete-p (text)
+  "Is TEXT a whole form?
+Parens balanced and not inside a string or comment.  RET on a half-typed form
+should open a line, not send something the reader will reject."
+  (let ((state (with-temp-buffer
+                 (set-syntax-table flan-mode-syntax-table)
+                 (insert text)
+                 (parse-partial-sexp (point-min) (point-max)))))
+    (and (<= (nth 0 state) 0)            ; depth
+         (not (nth 3 state))             ; in a string
+         (not (nth 4 state)))))          ; in a comment
+
+(defun flan-repl--output (text)
+  "Insert TEXT into the REPL buffer above the next prompt."
+  (let ((proc (get-buffer-process (current-buffer))))
+    (comint-output-filter proc (concat text "\n" flan-repl-prompt))))
+
+(defun flan-repl--send (_proc text)
+  "Evaluate TEXT in the running program and show what it was."
+  (let ((code (string-trim text)))
+    (cond
+     ((string-empty-p code) (flan-repl--output ""))
+     (t
+      (let ((reply (condition-case err
+                       (flan-dev--request
+                        (list :op "eval-expr" :code code :file "<repl>"))
+                     (error (list :status "error"
+                                  :message (error-message-string err))))))
+        (flan-repl--output
+         (if (equal (plist-get reply :status) "ok")
+             (or (plist-get reply :value) "")
+           (concat "error: " (or (plist-get reply :message) "rejected")
+                   (let ((loc (plist-get reply :loc)))
+                     (if loc (concat "  (" loc ")") ""))))))))))
+
+(defun flan-repl-return ()
+  "Send the input if it is a whole form, otherwise open a line."
+  (interactive)
+  (let ((input (buffer-substring-no-properties
+                (process-mark (get-buffer-process (current-buffer)))
+                (point-max))))
+    (if (flan-repl--complete-p input)
+        (comint-send-input)
+      (insert "\n"))))
+
+(define-key flan-repl-mode-map (kbd "RET") #'flan-repl-return)
+
+;;;###autoload
+(defun flan-repl ()
+  "Open a prompt on the program `flan dev' is running.
+Connects first if it has to."
+  (interactive)
+  (unless (and flan-dev--connection (process-live-p flan-dev--connection))
+    (call-interactively #'flan-connect))
+  (let ((buf (get-buffer-create flan-repl-buffer)))
+    (with-current-buffer buf
+      (unless (derived-mode-p 'flan-repl-mode)
+        (flan-repl-mode)
+        ;; comint wants a process to hang a prompt and a process mark off.
+        ;; There is nothing to run, so this one does nothing and is never
+        ;; written to; every request goes over the daemon's socket instead.
+        (let ((proc (start-process "flan-repl" buf "cat")))
+          (set-process-query-on-exit-flag proc nil)
+          (comint-output-filter proc flan-repl-prompt))))
+    (pop-to-buffer buf)))
+
+(provide 'flan-repl)
+;;; flan-repl.el ends here
diff --git a/emacs/test-flan-dev.el b/emacs/test-flan-dev.el
index c77eae5..ab9dce3 100644
--- a/emacs/test-flan-dev.el
+++ b/emacs/test-flan-dev.el
@@ -12,6 +12,7 @@
 
 (require 'flan-mode)
 (require 'flan-dev)
+(require 'flan-repl)
 
 (defvar test-flan--failures 0)
 
@@ -75,6 +76,54 @@
                    (string-match-p "HELLO" (buffer-string)))))
     (test-flan--check "the program's output reaches its buffer" seen))
 
+  ;; The REPL buffer: typed input goes through the same eval-expr request, and
+  ;; the value lands at the prompt while the program's own output goes to
+  ;; *flan-output*. Conflating those two is the bug worth testing for.
+  (test-flan--check "an incomplete form is not sent"
+                    (not (flan-repl--complete-p "(+ 1")))
+  (test-flan--check "a whole form is sent" (flan-repl--complete-p "(+ 1 2)"))
+  (test-flan--check "a paren in a string does not count"
+                    (not (flan-repl--complete-p "(f \"(\"")))
+  (flan-repl)
+  (with-current-buffer flan-repl-buffer
+    (goto-char (point-max))
+    (insert "(+ 20 3)")
+    (flan-repl-return)
+    (let ((deadline (+ (float-time) 15)))
+      (while (and (not (string-match-p "23" (buffer-string)))
+                  (< (float-time) deadline))
+        (accept-process-output nil 0.05)))
+    (test-flan--check "the REPL shows a value"
+                      (string-match-p "23" (buffer-string)))
+    (goto-char (point-max))
+    (insert "no-such-thing")
+    (flan-repl-return)
+    (let ((deadline (+ (float-time) 15)))
+      (while (and (not (string-match-p "unknown name" (buffer-string)))
+                  (< (float-time) deadline))
+        (accept-process-output nil 0.05)))
+    (test-flan--check "the REPL shows an error"
+                      (string-match-p "unknown name" (buffer-string)))
+    ;; A value and the program's output travel by different routes: the value
+    ;; is the result of the request, the output rides along with the reply.
+    ;; Showing them in one place would be convenient and wrong.
+    (goto-char (point-max))
+    (insert "(print-line \"PRINTED\")")
+    (flan-repl-return)
+    (let ((deadline (+ (float-time) 15)))
+      (while (and (not (with-current-buffer flan-dev-output-buffer
+                         (string-match-p "PRINTED" (buffer-string))))
+                  (< (float-time) deadline))
+        (ignore-errors (flan-dev--request '(:op "describe")))
+        (accept-process-output nil 0.05)))
+    (test-flan--check "printed text goes to the output buffer"
+                      (with-current-buffer flan-dev-output-buffer
+                        (string-match-p "PRINTED" (buffer-string))))
+    ;; ...and the prompt got the *value*, which for a call made for its effect
+    ;; is Unit. The text it printed is not the value and does not belong here.
+    (test-flan--check "and the prompt got the value, not the text"
+                      (string-match-p "()" (buffer-string))))
+
   (flan-disconnect)
   (test-flan--check "disconnected" (not (process-live-p flan-dev--connection)))
 
diff --git a/lib/session.ml b/lib/session.ml
index 5a5fe91..d4d6922 100644
--- a/lib/session.ml
+++ b/lib/session.ml
@@ -428,7 +428,11 @@ let rec render c depth (e : Tast.expr) : Tast.expr list =
     | Types.Float _ -> [ call emit_f64 (cast (Types.Float Types.F64) e) ]
     | Types.Bool ->
       [ unit_ (Tast.If (e, lit "true", lit "false")) ]
-    | Types.Unit -> [ lit "()" ]
+    (* Evaluated *and then* reported. A Unit expression is almost always a call
+       made for its effect — (print-line "x") is the REPL's most ordinary
+       input — so emitting the literal without running it would make the prompt
+       answer () while nothing happened. *)
+    | Types.Unit -> [ e; lit "()" ]
     | Types.String ->
       [ call emit_str
           { Tast.e = Tast.Prim (Tast.Bytes, [ e ]);
diff --git a/test/test_repl.ml b/test/test_repl.ml
index 6930ba8..42bdb91 100644
--- a/test/test_repl.ml
+++ b/test/test_repl.ml
@@ -102,6 +102,10 @@ let () =
       (* An enum's members are erased to i32 before the backend sees them, so
          the name is recovered from the checker's table. *)
       value "an enum" "col" ":blue";
+      (* A Unit expression is almost always a call made for its effect, so it
+         has to be *evaluated* and then reported as (). Emitting the literal
+         without running it made the prompt answer while nothing happened. *)
+      value "a call made for its effect" "(print-line \"printed\")" "()";
 
       (* The one that proves it ran inside the process: the program increments
          [ticks] every frame, so two evaluations of it must disagree. A copy