flan/test/test_dev.ml
Joseph Ferano 4723e49e4d Ask the object, not the text, whether the daemon built with -g
test_session.ml asserts that a debug session emits the metadata, which is
the unpassed-argument defect itself. It cannot see the other half: it is
Build.shared that turns the flag into -g and -O0 on the module, and a
daemon that dropped Build.debug from its opts would still emit perfect IR
and then compile it away — llvm.dbg.declare describes an alloca and
mem2reg deletes the alloca, so the symptom would be a module that looks
right in every text assertion and has no locals in the debugger.

So this drives a real `flan dev --debug`, sends one redefinition, and runs
llvm-dwarfdump over the .so the daemon actually wrote. The line table is
the needle because it is what a breakpoint in a .flan buffer resolves
against, and it names the file the form was typed in rather than anything
on disk. Skipped where there is no llvm-dwarfdump.
2026-09-12 05:17:13 +07:00

789 lines
37 KiB
OCaml

(* [flan dev]: the daemon an editor talks to (NEXT.md, the dev loop).
What it adds over [flan reload] is that the session persists between
evaluations and that the daemon owns the build, so its idea of the running
process is not a guess. Both are tested here by sending a sequence: a name
the program was never built with, then a second evaluation that uses it. If
the session were rebuilt per request the second one would not even check. *)
open Flan
let failures = ref 0
let fail fmt = Printf.ksprintf (fun s -> incr failures; print_endline ("FAIL " ^ s)) fmt
let scratch = Filename.get_temp_dir_name ()
let tmp n = Filename.concat scratch ("flan-devtest-" ^ n)
let rec await ?(ms = 5000) f =
if f () then true
else if ms <= 0 then false
else begin ignore (Unix.select [] [] [] 0.005); await ~ms:(ms - 5) f end
let rec connect ?(ms = 5000) path =
let s = Unix.socket Unix.PF_UNIX Unix.SOCK_STREAM 0 in
match Unix.connect s (Unix.ADDR_UNIX path) with
| () -> s
| exception Unix.Unix_error (_, _, _) when ms > 0 ->
Unix.close s;
ignore (Unix.select [] [] [] 0.005);
connect ~ms:(ms - 5) path
(* The program's own output arrives on the replies, not on a file: the daemon
reads its stdout through a pipe so an editor can see it. Every reply is
drained into here, which is also what an editor does. *)
let output = Buffer.create 256
let request fd sexp =
let r = Wire.parse (Wire.send fd sexp; Wire.recv fd) in
(match Wire.string_field r "output" with
| Some t -> Buffer.add_string output t
| None -> ());
r
let status r =
match Wire.string_field r "status" with Some s -> s | None -> "<none>"
let () =
match Sys.command "command -v clang > /dev/null 2>&1 && command -v llc > /dev/null 2>&1" with
| 0 ->
let sock = tmp "dev.sock" in
let out = tmp "prog.out" in
(try Sys.remove sock with Sys_error _ -> ());
let fd = Unix.openfile out [ Unix.O_WRONLY; Unix.O_CREAT; Unix.O_TRUNC ] 0o600 in
(* The daemon is run as a subprocess rather than in-process because that is
how an editor meets it, and because it launches and owns a program of
its own. Its child's stdout is what we read the result off. *)
let flan = "../bin/main.exe" in
let pid =
Unix.create_process flan
[| flan; "dev"; "programs/dev-loop.flan"; "-s"; sock |]
Unix.stdin fd Unix.stderr
in
Unix.close fd;
if not (await (fun () -> Sys.file_exists sock)) then
fail "the daemon never listened"
else begin
(* The daemon owns the program's lifetime and kills it on [close], so
every step waits for the program to have got there. "ok" from an eval
means the module was queued, not that it has been installed. *)
let c = connect sock in
(* The daemon owns the program's lifetime and kills it on [close], so
every step waits for the program to have got there. "ok" from an eval
means the module was queued, not that it has been installed. Output
only rides along with a reply, so asking is how it is collected, and
[describe] is the cheapest question there is. *)
let lines () =
List.length (String.split_on_char '\n' (Buffer.contents output)) - 1
in
let settle n =
await (fun () ->
ignore (request c "(:op \"describe\")");
lines () >= n)
in
(* describe: what the daemon believes about the program it launched. *)
let r = request c "(:op \"describe\")" in
if status r <> "ok" then fail "describe: %s" (status r);
(* [defs] is its own op rather than more fields on [describe], because
[describe] is what an editor polls to drain the program's output. It
carries what eldoc, completion and find-definition each need: a kind,
a signature, and where the name is written where that is knowable.
An empty location is the honest answer for a global — Tast.global has
no Loc — and an editor is expected to refuse rather than guess. *)
let r = request c "(:op \"defs\")" in
if status r <> "ok" then fail "defs: %s" (status r);
(match Wire.field r "defs" with
| Some { Form.v = Form.List entries; _ } ->
let find name =
List.find_map
(fun (e : Form.t) ->
match e.Form.v with
| Form.List
({ Form.v = Form.Str n; _ }
:: { Form.v = Form.Str kind; _ }
:: { Form.v = Form.Str sign; _ }
:: { Form.v = Form.Str loc; _ } :: [])
when String.equal n name -> Some (kind, sign, loc)
| _ -> None)
entries
in
(match find "step" with
| Some ("fn", "step [] i64", loc) when String.length loc > 0 ->
(* Absolute, because an editor is not in this process's working
directory and cannot resolve a relative one. *)
if loc.[0] <> '/' then fail "a fn's location is relative: %s" loc
| Some (k, s, l) -> fail "step is described as (%s, %s, %s)" k s l
| None -> fail "defs did not mention step");
(match find "ticks" with
| Some ("var", "ticks i64", "") -> ()
| Some (k, s, l) -> fail "ticks is described as (%s, %s, %s)" k s l
| None -> fail "defs did not mention ticks");
(match find "agent/wait-raw" with
| Some ("extern", _, _) -> ()
| Some (k, _, _) -> fail "an extern is described as %s" k
| None -> fail "defs did not mention an imported extern")
| _ -> fail "defs did not answer with a list");
(* A form that does not check comes back as an error with a location,
and must not disturb the session. *)
let r = request c "(:op \"eval\" :code \"(defn step [] i64 nonsense)\" :file \"/tmp/buf.flan\")" in
if status r <> "error" then fail "a bad form was accepted";
(match Wire.string_field r "loc" with
| Some l when String.length l > 0 -> ()
| _ -> fail "an error carried no location");
(* A name the program was never built with, then a second evaluation
that uses it. The second one only checks at all because the session
kept the first. *)
let r =
request c
"(:op \"eval\" :code \"(defvar extra i64) (defn step [] i64 (set extra (+ extra 5)) extra)\" :file \"/tmp/buf.flan\")"
in
if status r <> "ok" then
fail "adding a var: %s"
(Option.value ~default:"" (Wire.string_field r "message"));
(* Wait for the program to have installed it before sending the next.
Both queued at once is a legitimate thing for the agent to do — one
poll installs everything pending — but then only the last is observed
and the sequencing is not what was tested. *)
if not (settle 2) then fail "the first reload was never installed";
let r =
request c
"(:op \"eval\" :code \"(defn step [] i64 (set extra (+ extra 100)) extra)\" :file \"/tmp/buf.flan\")"
in
if status r <> "ok" then
fail "reusing a var added earlier: %s"
(Option.value ~default:"" (Wire.string_field r "message"));
(* A change the running process cannot be told, refused with the reason
rather than delivered. *)
let r = request c "(:op \"eval\" :code \"(defvar ticks i32)\" :file \"/tmp/buf.flan\")" in
if status r <> "error"
|| not
(match Wire.string_field r "message" with
| Some m -> String.length m > 0
| None -> false)
then fail "retyping a global was not refused";
if not (settle 3) then fail "the second reload was never installed";
(* A restart-case in a body the process was never built with. The frame
it offers is an alloca in the newly loaded module's text, the call it
guards goes through the host's cell, and the transfer starts in a
handler and crosses [probe], which the host was compiled with. None of
those three meet anywhere else in the tests. *)
let r =
request c
"(:op \"eval\" :code \"(defn step [] i64 (restart-case (do (handler-bind [(Missing [c] (invoke-restart 'use-fallback))] (probe)) 0) (use-fallback [] 777)))\" :file \"/tmp/buf.flan\")"
in
if status r <> "ok" then
fail "a redefinition with a restart-case: %s"
(Option.value ~default:"" (Wire.string_field r "message"));
if not (settle 4) then fail "the third reload was never installed";
(* Expression evaluation, which is a different primitive: no name to
install a body into, so a thunk runs at a frame boundary and the value
comes back rendered. The program has stopped reaching frame boundaries
by now, so this only checks that the types that have no printer say so
rather than guessing — the live path is test_repl. *)
let r = request c "(:op \"eval-expr\" :code \"(defvar x i64)\" :file \"/tmp/buf.flan\")" in
if status r <> "error" then fail "a declaration was accepted as an expression";
ignore (request c "(:op \"close\")");
Unix.close c;
(* Closing the connection ends the program, and its transcript is the
proof: 1 before any reload, 5 from a body over a var that did not
exist when it started, 105 from a second body reading the same one,
and 777 from a restart clause in a third — reached by a transfer that
started in a handler and crossed a function the host was built with. *)
ignore (Unix.waitpid [] pid);
let text = Buffer.contents output in
let wanted = "1\n5\n105\n777\n" in
if text <> wanted then
fail "program transcript\n got: %S\n wanted: %S" text wanted
end;
(* ── The break loop, from the editor's side ────────────────────── *)
(* A second daemon, over a program that stops on its first frame. The
claims are that an editor can find out it stopped without having been
told, that everything an editor does still works while it is stopped —
C-x C-e most of all, since the break loop *is* the poll loop — and that
a choice comes back refused or accepted, never "probably".
Its own daemon, its own program and its own output buffer: the block
above ends by checking a transcript, and sharing either with this would
make that check about two programs at once. *)
let bsock = tmp "break.sock" and bout = tmp "break.out" in
(try Sys.remove bsock with Sys_error _ -> ());
let bfd = Unix.openfile bout [ Unix.O_WRONLY; Unix.O_CREAT; Unix.O_TRUNC ] 0o600 in
let bpid =
Unix.create_process flan
[| flan; "dev"; "programs/dev-break.flan"; "-s"; bsock |]
Unix.stdin bfd Unix.stderr
in
Unix.close bfd;
if not (await (fun () -> Sys.file_exists bsock)) then begin
fail "the break daemon never listened";
(try Unix.kill bpid Sys.sigkill with Unix.Unix_error _ -> ())
end
else begin
let boutput = Buffer.create 256 in
let c = connect bsock in
let ask sexp =
let r = Wire.parse (Wire.send c sexp; Wire.recv c) in
(match Wire.string_field r "output" with
| Some t -> Buffer.add_string boutput t
| None -> ());
r
in
(* [:stopped] is on every reply, whatever was asked. An editor that had
to ask would find out only when it happened to wonder, and a program
stops at moments nobody is wondering about. *)
let stopped r =
match Wire.field r "stopped" with
| Some { Form.v = Form.Sym "t"; _ } -> true
| _ -> false
in
let condition r =
match Wire.string_field r "condition" with Some c -> c | None -> ""
in
let last = ref (ask "(:op \"describe\")") in
if not (await (fun () -> last := ask "(:op \"describe\")"; stopped !last))
then fail "a stopped program never said so on a reply it was already sending"
else begin
if condition !last <> "Missing" then
fail "the condition is reported as %S, wanted %S" (condition !last)
"Missing";
(* What is on offer, innermost first. [break] carries the names and
nothing else — the state is the annotation's business, so there is
one place in the daemon that decides it. *)
let r = ask "(:op \"break\")" in
if status r <> "ok" then fail "break: %s" (status r);
(match Wire.field r "restarts" with
| Some { Form.v = Form.List names; _ } ->
let names =
List.filter_map
(fun (n : Form.t) ->
match n.Form.v with Form.Str s -> Some s | _ -> None)
names
in
if names <> [ "retry"; "use-placeholder" ] then
fail "restarts on offer: %s" (String.concat ", " names)
| _ -> fail "break did not list the restarts");
(* The payoff. The break loop is the poll loop, so an expression
evaluated here is a module the listener queues and the *stopped*
thread runs — which is the only reason C-x C-e works at the one
moment anybody wants it to. *)
let r =
ask "(:op \"eval-expr\" :code \"(+ 20 3)\" :file \"/tmp/buf.flan\")"
in
if Wire.string_field r "value" <> Some "23" then
fail "C-x C-e while stopped: %s"
(Option.value ~default:(status r) (Wire.string_field r "message"));
(* And installing, which the break loop deliberately allows: there is
no frame in progress, so the rule about swapping a body that is on
the stack does not apply. This is the fix-it-and-retry loop. *)
let r =
ask
"(:op \"eval\" :code \"(defn step [] i64 (set ticks (+ ticks 100)) ticks)\" :file \"/tmp/buf.flan\")"
in
if status r <> "ok" then
fail "installing while stopped: %s"
(Option.value ~default:"" (Wire.string_field r "message"));
(* A name nothing offers is refused against the live stack, on the
program's listener thread, before the reply. *)
let r = ask "(:op \"restart\" :name \"nonesuch\")" in
if status r <> "error" then fail "a restart nobody offers was accepted";
let r = ask "(:op \"restart\" :name \"retry\")" in
if status r <> "ok" then
fail "choosing a restart: %s"
(Option.value ~default:"" (Wire.string_field r "message"));
(* [retry] returns 7 and [use-placeholder] returns -1, so the number in
the transcript is the proof that this choice and not the other one
was taken. *)
let printed () =
ignore (ask "(:op \"describe\")");
List.exists (String.equal "7")
(String.split_on_char '\n' (Buffer.contents boutput))
in
if not (await printed) then fail "the chosen restart never resumed";
(* Running again, and now every break verb is refused by name. There is
no restart stack to walk from a running program, and answering an
empty list would read as "no restarts are active". *)
if not (await (fun () -> not (stopped (ask "(:op \"describe\")")))) then
fail "the program still reads as stopped after resuming"
else begin
let r = ask "(:op \"restart\" :name \"retry\")" in
if status r <> "error" then
fail "a restart was accepted by a running program";
let r = ask "(:op \"abort\")" in
if status r <> "error" then
fail "an abort was accepted by a running program";
(* ...and an ordinary evaluation works again on the far side of it. *)
let r =
ask "(:op \"eval-expr\" :code \"(+ 1 1)\" :file \"/tmp/buf.flan\")"
in
if Wire.string_field r "value" <> Some "2" then
fail "an expression after the break: %s"
(Option.value ~default:(status r) (Wire.string_field r "message"));
(* An expression that stops *itself*. The thunk runs on the game
thread from inside a poll, and the break loop it lands in polls
again from inside that very call — so the agent's poll has to be
re-entrant. One that cached its indices and wrote them back at the
end would rewind over everything the nested poll consumed and run
this same thunk again, which is not a stumble but an unbounded
recursion of breaks.
The evaluation cannot answer from in there and says so, with the
reason, rather than waiting forever or claiming a value. *)
let r =
ask
"(:op \"eval-expr\" :code \"(i64 (fetch 2))\" :file \"/tmp/buf.flan\")"
in
if status r <> "error" then
fail "an expression that stopped the program answered anyway";
if not (stopped r) then
fail "an expression that stopped the program did not report it";
let r = ask "(:op \"restart\" :name \"use-placeholder\")" in
if status r <> "ok" then
fail "resuming an expression that stopped: %s"
(Option.value ~default:"" (Wire.string_field r "message"));
if not (await (fun () -> not (stopped (ask "(:op \"describe\")")))) then
fail "the stopped expression never resumed"
else
let r =
ask "(:op \"eval-expr\" :code \"(+ 2 2)\" :file \"/tmp/buf.flan\")"
in
(* Still there, and evaluating once per evaluation: a thunk run
twice by a rewound queue would have broken a second time. *)
if Wire.string_field r "value" <> Some "4" then
fail "an expression after a break inside a thunk: %s"
(Option.value ~default:(status r) (Wire.string_field r "message"))
end
end;
(* ...and the other way out. Every check above is of an abort being
*refused*; the accepted path is the one that must not be left as code
that has never run, because it is the one that ends a program. Break
it once more — the daemon's own program calls [step] every time round
its loop, so a body that errors stops it — and take the exit. *)
(match
ask
"(:op \"eval\" :code \"(defn step [] i64 (restart-case (do (error (Missing {:id 9})) 0) (use-placeholder [] -1)))\" :file \"/tmp/buf.flan\")"
with
| r when status r <> "ok" ->
fail "installing a body that errors: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
| _ ->
if not (await (fun () -> stopped (ask "(:op \"describe\")"))) then
fail "the program never stopped on the body that errors"
else begin
let r = ask "(:op \"abort\")" in
if status r <> "ok" then
fail "abort was refused by a stopped program: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
end);
Unix.close c;
(* No [close] op: an abort ends the program, and the daemon owns the
program's lifetime, so it comes down on its own. A daemon still
running here would be one waiting on a socket nobody will use. *)
if not
(await ~ms:5000 (fun () ->
match Unix.waitpid [ Unix.WNOHANG ] bpid with
| 0, _ -> false
| _ -> true
| exception Unix.Unix_error _ -> true))
then begin
fail "the daemon outlived the program it aborted";
(try Unix.kill bpid Sys.sigkill with Unix.Unix_error _ -> ());
(try ignore (Unix.waitpid [] bpid) with Unix.Unix_error _ -> ())
end
end;
(* ── Disassembly ───────────────────────────────────────────────── *)
(* A third daemon, over a program that keeps running, because the two
claims here are about *which* module owns a name and what the answer is
allowed to say it means — and both change the moment a body is
delivered. Its own session rather than a reuse of the first: the first
one's program has been reloaded four times and abandoned by the time it
gets here, and a generation counter tested against a session someone
else drove says nothing. *)
let dsock = tmp "disasm.sock" and dout = tmp "disasm.out" in
(try Sys.remove dsock with Sys_error _ -> ());
let dfd = Unix.openfile dout [ Unix.O_WRONLY; Unix.O_CREAT; Unix.O_TRUNC ] 0o600 in
let dpid =
Unix.create_process flan
[| flan; "dev"; "programs/dev-repl.flan"; "-s"; dsock |]
Unix.stdin dfd Unix.stderr
in
Unix.close dfd;
if not (await (fun () -> Sys.file_exists dsock)) then begin
fail "the disassembly daemon never listened";
(try Unix.kill dpid Sys.sigkill with Unix.Unix_error _ -> ())
end
else begin
let c = connect dsock in
let generation r =
match Wire.field r "generation" with
| Some { Form.v = Form.Int n; _ } -> Some (Int64.to_int n)
| _ -> None
in
let text r = Option.value ~default:"" (Wire.string_field r "text") in
let basis r = Option.value ~default:"" (Wire.string_field r "basis") in
let has hay needle =
let n = String.length needle and h = String.length hay in
let rec go i = i + n <= h && (String.sub hay i n = needle || go (i + 1)) in
n > 0 && go 0
in
let have_objdump =
Sys.command "command -v objdump > /dev/null 2>&1" = 0
in
(* Nothing has been delivered, so the cell still holds the body the
process was launched with. This is the one case where "what is
installed now" is knowable, and the reply has to say so rather than
hedging like the others. *)
let r = request c "(:op \"disassemble\" :name \"step\" :form \"ir\")" in
if status r <> "ok" then
fail "the IR of a name the program was built with: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
if generation r <> Some 0 then
fail "an untouched name is not generation 0";
if not (has (text r) "define") || not (has (text r) "flan.step") then
fail "the IR of step is not a define of it: %S" (text r);
(* One function, not the module: dev-repl.flan defines [main] too, and
a slice that ran past its own closing brace would carry it. *)
if has (text r) "flan.main" then
fail "the IR of step carried another function with it";
if not (has (basis r) "host executable") then
fail "an untouched name does not say it is the host's: %S" (basis r)
end;
(* Delivering one moves the ownership, and with it everything the reply
derives from it: the generation, the object, the location the body was
typed at, and what the answer is now allowed to claim. *)
let r =
request c
"(:op \"eval\" :code \"(defn step [] i64 (set ticks (+ ticks 7)) ticks)\" :file \"/tmp/disasm.flan\")"
in
if status r <> "ok" then
fail "installing a body to disassemble: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
let r = request c "(:op \"disassemble\" :name \"step\" :form \"ir\")" in
if status r <> "ok" then
fail "the IR of a redefined name: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
if generation r <> Some 1 then
fail "a redefined name is not generation 1: %s"
(match generation r with Some n -> string_of_int n | None -> "none");
(* The body that was just sent, not the one the program was built
with — the two differ only in the constant. *)
if not (has (text r) "7") then
fail "the IR shown is not the body that was delivered: %S" (text r);
if Wire.string_field r "loc" <> Some "/tmp/disasm.flan:1:7" then
fail "the location is not where the new body was typed: %s"
(Option.value ~default:"" (Wire.string_field r "loc"));
match Wire.string_field r "object" with
| Some o when Filename.check_suffix o ".ll" -> ()
| o ->
fail "the IR did not come from a .ll: %s" (Option.value ~default:"" o)
end;
(* The honesty rule, and the whole reason this op is not allowed to say
"installed": the daemon delivered a module and the agent queued it,
which is not the same as the game thread having stored it into a
cell — and there is no verb that would let the daemon find out. *)
let r = request c "(:op \"disassemble\" :name \"step\" :form \"ir\")" in
if has (basis r) "host executable" then
fail "a delivered body still claims to be the host's";
if not (has (basis r) "cannot read the cell back")
&& not (has (basis r) "not installed yet")
&& not (has (basis r) "cannot be said")
then fail "a delivered body claims more than delivery: %S" (basis r)
end;
if not have_objdump then
print_endline "dev: disassembly skipped (no objdump on PATH)"
else begin
let r = request c "(:op \"disassemble\" :name \"step\" :form \"asm\")" in
if status r <> "ok" then
fail "the machine code of a redefined name: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
(* Offsets from the function's own start, SBCL's way: an address into
a .so is the one number on the line a reader cannot use. The first
instruction is therefore at 0000 whatever the object's layout. *)
if not (has (text r) " 0000 ") then
fail "the listing is not rebased to the function's start: %S" (text r);
if not (has (text r) "ret") then
fail "the listing has no instructions in it: %S" (text r);
(* Not faked. There are no line tables in this build, so the reply
says that rather than printing a listing with no source in it. *)
if not (has (Option.value ~default:"" (Wire.string_field r "note"))
"line tables")
then fail "the listing does not say why there is no source in it";
match Wire.string_field r "object" with
| Some o when Filename.check_suffix o ".so" -> ()
| o -> fail "the code did not come from a .so: %s"
(Option.value ~default:"" o)
end;
(* The other presentation borrow, and the one that needs a body with
somewhere to jump to: a branch inside the function reads as [L0]
rather than as an address into an object nobody will open. *)
let r =
request c
"(:op \"eval\" :code \"(defn wind [n i32] i32 (let [acc 0] (dotimes [i n] (set acc (+ acc i))) acc))\" :file \"/tmp/disasm.flan\")"
in
if status r <> "ok" then
fail "installing a body with a loop in it: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else
let r = request c "(:op \"disassemble\" :name \"wind\" :form \"asm\")" in
if status r <> "ok" then
fail "the machine code of a loop: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else if not (has (text r) "L0:") then
fail "a branch target is not labelled: %S" (text r)
else if has (text r) "<flan.wind+" then
fail "a branch still names the function it is inside: %S" (text r)
end;
(* Refused by name, each for its own reason: [ok] would have to mean
"probably" otherwise. *)
let refused what req wanted =
let r = request c req in
if status r <> "error" then fail "%s was not refused" what
else
match Wire.string_field r "message" with
| Some m when has m wanted -> ()
| m ->
fail "%s was refused for the wrong reason: %s" what
(Option.value ~default:"" m)
in
refused "a global" "(:op \"disassemble\" :name \"ticks\" :form \"asm\")"
"not a function";
refused "a name nothing defines"
"(:op \"disassemble\" :name \"no-such-fn\" :form \"asm\")"
"no function named";
refused "a form that is neither ir nor asm"
"(:op \"disassemble\" :name \"step\" :form \"pdf\")"
"\"ir\" or";
refused "a request with no name" "(:op \"disassemble\" :form \"asm\")"
"needs :name";
(* A stopped program has not thereby failed to install. The commonest way
to stop is to install a body and have it error, so the one thing the
basis must not say here is "not installed yet" — it would be asserting
non-installation in exactly the case where the body is running. *)
let stopped r =
match Wire.field r "stopped" with
| Some { Form.v = Form.Sym "t"; _ } -> true
| _ -> false
in
let r =
request c
"(:op \"eval\" :code \"(defn step [] i64 (error (Missing {:id 3})))\" :file \"/tmp/disasm.flan\")"
in
if status r <> "ok" then
fail "installing a body that errors: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else if
not (await (fun () -> stopped (request c "(:op \"describe\")")))
then fail "the program never stopped on the body that errors"
else begin
let r = request c "(:op \"disassemble\" :name \"step\" :form \"ir\")" in
if status r <> "ok" then
fail "disassembling while the program is stopped: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
if not (has (basis r) "stopped on Missing") then
fail "a stopped program is not mentioned in the basis: %S" (basis r);
if has (basis r) "not installed" then
fail "a stopped program is said not to have installed: %S" (basis r)
end
end;
ignore (request c "(:op \"close\")");
Unix.close c;
if not
(await ~ms:5000 (fun () ->
match Unix.waitpid [ Unix.WNOHANG ] dpid with
| 0, _ -> false
| _ -> true
| exception Unix.Unix_error _ -> true))
then begin
(try Unix.kill dpid Sys.sigkill with Unix.Unix_error _ -> ());
(try ignore (Unix.waitpid [] dpid) with Unix.Unix_error _ -> ())
end
end;
List.iter (fun f -> try Sys.remove f with Sys_error _ -> ()) [ dsock; dout ];
(* ── A location that survives an evaluation that did not land ───── *)
(* [Session.eval] replaces the checked program the moment a form checks,
which is before the build and before delivery. So there is a window in
which the session holds a body the running process has never seen, and a
disassembly that took its source location from the session would point
into the buffer of code that never landed — while showing the host's
code and saying, correctly, that nothing had been delivered. One reply
contradicting itself in two fields.
A daemon whose [llc] is [false] reproduces it exactly and cheaply: the
host is built by clang and runs, every redefinition checks and then
fails to build, and nothing is ever delivered. *)
let ssock = tmp "stale.sock" and sout = tmp "stale.out" in
(try Sys.remove ssock with Sys_error _ -> ());
let sfd = Unix.openfile sout [ Unix.O_WRONLY; Unix.O_CREAT; Unix.O_TRUNC ] 0o600 in
let env =
Array.append (Unix.environment ()) [| "FLAN_LLC=false" |]
in
let spid =
Unix.create_process_env flan
[| flan; "dev"; "programs/dev-repl.flan"; "-s"; ssock |]
env Unix.stdin sfd Unix.stderr
in
Unix.close sfd;
if not (await (fun () -> Sys.file_exists ssock)) then begin
fail "the daemon with no working llc never listened";
(try Unix.kill spid Sys.sigkill with Unix.Unix_error _ -> ())
end
else begin
let c = connect ssock in
let has hay needle =
let n = String.length needle and h = String.length hay in
let rec go i = i + n <= h && (String.sub hay i n = needle || go (i + 1)) in
n > 0 && go 0
in
let r =
request c
"(:op \"eval\" :code \"(defn step [] i64 (set ticks (+ ticks 9)) ticks)\" :file \"/tmp/never-landed.flan\")"
in
if status r <> "error" then
fail "an evaluation that cannot be built was reported as installed";
let r = request c "(:op \"disassemble\" :name \"step\" :form \"ir\")" in
if status r <> "ok" then
fail "disassembling after a build that failed: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
let loc = Option.value ~default:"" (Wire.string_field r "loc") in
if has loc "never-landed" then
fail "the location is a buffer whose code was never delivered: %s" loc;
if not (has loc "dev-repl.flan") then
fail "the location is not the source the process was built from: %s" loc
end;
ignore (request c "(:op \"close\")");
Unix.close c;
if not
(await ~ms:5000 (fun () ->
match Unix.waitpid [ Unix.WNOHANG ] spid with
| 0, _ -> false
| _ -> true
| exception Unix.Unix_error _ -> true))
then begin
(try Unix.kill spid Sys.sigkill with Unix.Unix_error _ -> ());
(try ignore (Unix.waitpid [] spid) with Unix.Unix_error _ -> ())
end
end;
List.iter (fun f -> try Sys.remove f with Sys_error _ -> ()) [ ssock; sout ];
(* --debug, and the half the IR cannot show.
[test_session.ml] asserts that a debug session *emits* the metadata,
which is the unpassed-argument defect itself. It cannot see the other
half: [Build.shared] is what turns the flag into [-g] and [-O0] on the
module, and a daemon that dropped [Build.debug] from its opts would
still emit perfect IR and then compile it away — [llvm.dbg.declare]
describes an alloca and mem2reg deletes the alloca. So this goes to the
.so the daemon actually wrote and asks the object, not the text.
The line table is the needle because it is what a breakpoint in a .flan
buffer resolves against, and it names the file the form was typed in
rather than any file on disk. *)
if Sys.command "command -v llvm-dwarfdump > /dev/null 2>&1" = 0 then begin
let gsock = tmp "dbg.sock" and gout = tmp "dbg.out" in
(try Sys.remove gsock with Sys_error _ -> ());
let gfd =
Unix.openfile gout [ Unix.O_WRONLY; Unix.O_CREAT; Unix.O_TRUNC ] 0o600
in
let gpid =
Unix.create_process flan
[| flan; "dev"; "programs/dev-repl.flan"; "-s"; gsock; "--debug" |]
Unix.stdin gfd Unix.stderr
in
Unix.close gfd;
if not (await (fun () -> Sys.file_exists gsock)) then begin
fail "the --debug daemon never listened";
(try Unix.kill gpid Sys.sigkill with Unix.Unix_error _ -> ())
end
else begin
let c = connect gsock in
let r =
request c
"(:op \"eval\" :code \"(defn step [] i64 (let [n (i64 3)] (set ticks (+ ticks n)) ticks))\" :file \"/tmp/dbg.flan\")"
in
if status r <> "ok" then
fail "a --debug daemon refused an ordinary redefinition: %s"
(Option.value ~default:"" (Wire.string_field r "message"))
else begin
(* The daemon builds into /tmp/flan-dev-<pid>, one module per eval,
and never reuses a name — dlopen caches by path. The first is
m1.so. *)
let so =
Filename.concat
(Filename.concat (Filename.get_temp_dir_name ())
(Printf.sprintf "flan-dev-%d" gpid))
"m1.so"
in
if not (Sys.file_exists so) then
fail "the --debug daemon left no module at %s" so
else begin
let dump = tmp "dbg.dwarf" in
let code =
Sys.command
(Printf.sprintf "llvm-dwarfdump --debug-line %s > %s 2>&1"
(Filename.quote so) (Filename.quote dump))
in
let text =
if code <> 0 then ""
else In_channel.with_open_bin dump In_channel.input_all
in
(try Sys.remove dump with Sys_error _ -> ());
let has hay needle =
let n = String.length needle and h = String.length hay in
let rec go i =
i + n <= h && (String.sub hay i n = needle || go (i + 1))
in
n > 0 && go 0
in
if not (has text "dbg.flan") then
fail
"a --debug daemon's module carries no line table for the form's \
file, so a line breakpoint would stay pending across C-c C-c"
end
end;
(try Unix.kill gpid Sys.sigkill with Unix.Unix_error _ -> ());
(try ignore (Unix.waitpid [] gpid) with Unix.Unix_error _ -> ())
end;
List.iter (fun f -> try Sys.remove f with Sys_error _ -> ()) [ gsock; gout ]
end;
List.iter (fun f -> try Sys.remove f with Sys_error _ -> ())
[ sock; out; bsock; bout ];
if !failures = 0 then print_endline "dev: all tests passed"
else begin
Printf.printf "\n%d failure(s)\n" !failures;
exit 1
end
| _ -> print_endline "dev: skipped (no clang or llc on PATH)"