📟 pmme-device: backporting - Match uart_data reading from Rust

- Merged admin.cljs and sensors.cljs into core.cljs to consolidate UI logic
- Added WiFi network management interface with active/inactive status indicators
- Improved admin panel with async status checking and visual feedback
- Updated shadow-cljs config to use port 3000 and simplified mobile build
- Enhanced CSS with utility layer for badge-error class

pmme-device/c-version/main/pmme.c

@@ -12,8 +12,15 @@
 
 #include "driver/i2c_master.h"
 #include "driver/uart.h"
+#include "driver/gpio.h"
 #include "ssd1306/ssd1306.h"
 
+#include "esp_wifi.h"
+#include "esp_http_server.h"
+#include "esp_netif.h"
+#include "nvs_flash.h"
+#include "esp_event.h"
+
 static const char *TAG = "PMME-Device";
 
 #define I2C_HOST            0
@@ -29,6 +36,8 @@ static const char *TAG = "PMME-Device";
 #define UART_BUF_SIZE 128
 #define TXD_PIN 17
 #define RXD_PIN 16
+#define BUTTON_PIN  GPIO_NUM_5
+#define LED_PIN     GPIO_NUM_19
 
 #define SWAP_BYTES(x) ((x >> 8) | (x << 8))
 
@@ -69,7 +78,7 @@ void send_pms7003_command(uint8_t cmd, uint8_t datah, uint8_t datal) {
 
 void read_pm_data(uint8_t *buf) {
     uint16_t checksum = 0;
-    for (int i = 0; i <= 29; i++) {
+    for (int i = 0; i <= 28; i++) {
         checksum += buf[i];
     }
     uint16_t c = (((uint16_t)buf[30]) << 8) | ((uint16_t)buf[31]);
@@ -121,13 +130,12 @@ void pm_sensor_task(void *pvParameters) {
         int len = uart_read_bytes(UART_NUM, uart_data, BUF_SIZE, 100 / portTICK_PERIOD_MS);
         // ESP_LOGI(TAG, "Received %d bytes from sensor", len);
         if (len > 0) {
-            if (len == 32 && (uart_data[0] != 0x42 || uart_data[1] != 0x4D)) {
+            if (uart_data[0] != 0x42 || uart_data[1] != 0x4D) {
                 ESP_LOGW(TAG, "Frame Start does not match 0x42, 0x4D, instead got %x %x", uart_data[0], uart_data[1]);
-            } else {
+            } else if (len == 32) {
                 read_pm_data(uart_data);
-                // for(int i = 0; i < len && i < BUF_SIZE; i++) {
+            } else {
-                //     ESP_LOGI(TAG, "0x%02X", uart_data[i]);
+                ESP_LOGW(TAG, "Unexpected frame length: %d", len);
-                // }
             }
         }
         uart_flush(UART_NUM);
@@ -202,6 +210,10 @@ void oled_display_task_manual(void *pvParameters) {
 void oled_display_task(void *pvParameters) {
     init_ssd1306();
     char pm25_str[128];
+
+    ssd1306_fill_screen();
+    vTaskDelay(pdMS_TO_TICKS(3000));
+
     while (1) {
         uint16_t pm25_value = 0;
         if (xSemaphoreTake(sensor_data_mutex, pdMS_TO_TICKS(10))) {
@@ -219,6 +231,97 @@ void oled_display_task(void *pvParameters) {
     }
 }
 
+void button_led_task(void *pvParameters) {
+    gpio_config_t io_conf = {
+        .pin_bit_mask = (1ULL << LED_PIN),
+        .mode = GPIO_MODE_OUTPUT,
+        .pull_up_en = GPIO_PULLUP_DISABLE,
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .intr_type = GPIO_INTR_DISABLE,
+    };
+    gpio_config(&io_conf);
+
+    io_conf.pin_bit_mask = (1ULL << BUTTON_PIN);
+    io_conf.mode = GPIO_MODE_INPUT;
+    io_conf.pull_up_en = GPIO_PULLUP_ENABLE;
+    gpio_config(&io_conf);
+
+    gpio_set_level(LED_PIN, 0);
+
+    int curr_state = 1; // HIGH
+    bool is_pressed = false;
+    while (1) {
+        int level = gpio_get_level(BUTTON_PIN);
+        is_pressed = false;
+        if (curr_state == 1 && level == 0) {
+            gpio_set_level(LED_PIN, 1);
+            curr_state = 0;
+            is_pressed = true;
+        } else if (curr_state == 0 && level == 1) {
+            gpio_set_level(LED_PIN, 0);
+            curr_state = 1;
+            is_pressed = true;
+        }
+        vTaskDelay(pdMS_TO_TICKS(is_pressed ? 100 : 10));
+    }
+}
+
+static esp_err_t provision_handler(httpd_req_t *req) {
+    const char *response = "<html><body>Hello world!</body></html>";
+    httpd_resp_send(req, response, strlen(response));
+    return ESP_OK;
+}
+
+void wifi_task(void *pvParameters) {
+    // Initialize NVS
+    esp_err_t ret = nvs_flash_init();
+    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
+        ESP_ERROR_CHECK(nvs_flash_erase());
+        ESP_ERROR_CHECK(nvs_flash_init());
+    }
+
+    ESP_ERROR_CHECK(esp_netif_init());
+    ESP_ERROR_CHECK(esp_event_loop_create_default());
+
+    esp_netif_create_default_wifi_ap();
+
+    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
+    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
+
+    wifi_config_t wifi_config = {
+        .ap = {
+            .ssid = "PMME-Wifi",
+            .password = "88888888",
+            .ssid_len = strlen("PMME-Wifi"),
+            .channel = 1,
+            .authmode = WIFI_AUTH_WPA2_PSK,
+            .max_connection = 2,
+        },
+    };
+
+    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_AP));
+    ESP_ERROR_CHECK(esp_wifi_set_config(WIFI_IF_AP, &wifi_config));
+    ESP_ERROR_CHECK(esp_wifi_start());
+    ESP_LOGI(TAG, "WiFi AP started: SSID=PMME-Wifi");
+
+    httpd_handle_t server = NULL;
+    httpd_config_t server_config = HTTPD_DEFAULT_CONFIG();
+    ESP_ERROR_CHECK(httpd_start(&server, &server_config));
+
+    httpd_uri_t provision_uri = {
+        .uri      = "/api/provision",
+        .method   = HTTP_GET,
+        .handler  = provision_handler,
+        .user_ctx = NULL,
+    };
+    ESP_ERROR_CHECK(httpd_register_uri_handler(server, &provision_uri));
+    ESP_LOGI(TAG, "HTTP server started on port %d", server_config.server_port);
+
+    while (1) {
+        vTaskDelay(pdMS_TO_TICKS(500));
+    }
+}
+
 void app_main(void) {
     sensor_data_mutex = xSemaphoreCreateMutex();
     if (sensor_data_mutex == NULL) {
@@ -227,4 +330,6 @@ void app_main(void) {
     }
     xTaskCreate(pm_sensor_task, "pm_sensor_task", 4096, NULL, 5, NULL);
     xTaskCreate(oled_display_task, "oled_display_task", 4096, NULL, 5, NULL);
+    xTaskCreate(button_led_task, "button_led_task", 2048, NULL, 5, NULL);
+    xTaskCreate(wifi_task, "wifi_task", 8192, NULL, 5, NULL);
 }

pmme-device/c-version/main/ssd1306/ssd1306.c

@@ -559,3 +559,19 @@ esp_err_t i2c_ssd1306_buffer_to_ram(i2c_ssd1306_handle_t *i2c_ssd1306)
 
     return err;
 }
+
+// My Functions
+esp_err_t ssd1306_fill_screen(void) {
+    i2c_ssd1306_buffer_fill(&i2c_ssd1306);
+    return i2c_ssd1306_buffer_to_ram(&i2c_ssd1306);
+}
+
+void init_ssd1306_no_splash(void)
+{
+    i2c_new_master_bus(&i2c_master_bus_config, &i2c_master_bus);
+    i2c_ssd1306_init(i2c_master_bus, i2c_ssd1306_config, &i2c_ssd1306);
+    // i2c_ssd1306_buffer_image(&i2c_ssd1306, 32, 0, (const uint8_t *)ssd1306_logo, 64, 64, false);
+    // i2c_ssd1306_buffer_to_ram(&i2c_ssd1306);
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+    i2c_ssd1306_buffer_clear(&i2c_ssd1306);
+}

pmme-device/c-version/main/ssd1306/ssd1306.h

@@ -282,3 +282,8 @@ esp_err_t i2c_ssd1306_pages_to_ram(i2c_ssd1306_handle_t *i2c_ssd1306, uint8_t in
  * @return ESP_OK on success, or an error code otherwise.
  */
 esp_err_t i2c_ssd1306_buffer_to_ram(i2c_ssd1306_handle_t *i2c_ssd1306);
+
+// My Functions;
+esp_err_t ssd1306_fill_screen(void);
+void init_ssd1306_no_splash(void);
+