The thunk calls flan_dev_result_begin before it evaluates anything, so an
expression that signals is stopped inside the seqlock's window — and a restart
taken from that break transfers past the thunk, so the matching end never runs.
An unpaired begin cost nothing while the counter only moved at the end. It
costs everything now: incrementing would leave the count odd for the life of
the process, every later read reporting a write in progress, and C-x C-e dead
until the program restarts.
So begin sets the low bit rather than incrementing, and end clears it by
setting rather than adding. The ordinary sequence is unchanged — 2k, 2k+1,
2k+2 — and an abandoned write is over as soon as the next evaluation starts.
What that does not fix, because one buffer cannot: an evaluation running while
another is stopped mid-render shares the buffer, so the inner value is the one
that survives. That was true before the counter was a seqlock and is not a
regression.
Also noted in NEXT.md: rt_die in flan_rt.c has the same exit-with-the-loader-
lock-held shape the break loop just lost. Not fixed with it, because rt_die is
the non-dev path too, where there is no listener to deadlock against — whether
it should be _exit always or only under --dev is a decision.
And the 4K-cap assertions clamp their own String.sub, so a short body prints a
failure instead of raising out of the test.
The mutation pass turned up one defect that did not make the suite go
red: a reader branch that forgets to advance reads the same character
for ever, and dune test waits as long as it is left to. In CI that is a
job killed by the runner with nothing named and no output to read.
watchdog.ml puts an alarm on every test binary — generous, because an
alarm that fires on a slow machine is a flake — and a five-second one
around each read in test_flan, where the budget really is small. The
first read that does not return wedges the rest, so a looping reader
costs five seconds and names the row instead of costing eight minutes
or never finishing. Both were watched: the string-escape loop now fails
in five seconds with the case named, and the per-binary backstop was
armed short and observed to fire.
The 4K result cap and condition_name[128] are on the agent's socket path, which
is why the sanitizer corpus cannot reach them: a program in the sweep has no
socket and nobody on the other end of it. test_agent has both.
A 5000-byte string literal evaluated into the running program comes back as
exactly 4096 bytes ending in the ellipsis result_end puts there to say it
clamped — and it comes back through the seqlock's copy, so the cap and the new
reader are pinned by the same case. The header also shows the generation as 1,
which is the count of complete values rather than the raw counter.
A condition class of 198 characters comes back from `status` as 127 and a
terminator. Aborting out of that break is what pins the exit status at 134 now
that the loop leaves with _exit rather than exit.
SNAP_MAX, SNAP_NAMES and the dev registry's overflow guard are still read
rather than tested. Sixty-five nested restart-cases and four thousand interned
names are a lot of program to write for a clamp each, and neither is on a path
this session changed.
flan_dev_result_cap() exists so the size is asked for rather than written down
in two files: "the copy is never truncated" is only true while the agent's
buffer and the runtime's bound agree, and the agent checks that where the copy
happens.
The pipe the queue program blocks on is close-on-exec, or the child inherits
the write end and its own stdin never reaches end of file — it sat in its last
read waiting for a byte only it could send.
publish() wrote queue[head % QUEUE] without consulting tail, so the 65th module
queued between two agent/poll calls landed on the slot the game thread was
reading — twenty-four bytes of function pointers copied field by field with no
atomic near them, so the consumer could take half of one job and half of
another and call it. The comment claimed the overflow dropped the oldest
request; nothing did that.
A full ring is refused now, at the sender, before the dlopen. Dropping loses a
reload the sender was told was ok, which is the same lie more quietly; blocking
stalls the accept loop, which serves connections inline, so a program that had
stopped polling would also stop answering status and abort — the dev loop would
have no way to reach a program that had stopped listening to it. The check is
separate from the store because there is one producer: room, once seen, cannot
be taken away.
Two smaller defects in the same file:
A module with no flan_reload_install was refused and its handle dropped on the
floor. Not an exception to "nothing is ever dlclosed" — that rule is about a
module something points into, and this one installed nothing, so no cell names
it. What leaked was the handle value rather than the mapping: dlopen refcounts
by path, so re-sending the same bad file raised a count nothing could lower.
exit(134) from the break loop runs the atexit chain and the ELF destructors,
which want the loader lock the listener thread may be holding inside dlopen. A
program asked to abort would hang instead of dying. _exit, with the streams
flushed by hand at each call site. The deadlock itself is read rather than
tested; what the tests pin is that the exit status is still 134.
programs/agent-queue.flan blocks on stdin so the window is held open by the
test rather than by a timer: it takes 64 modules, refuses the 65th with a
reason, and installs 64 when it finally polls. noinstall.c's destructor prints
while the program is still running, which is the only way to see the close — at
exit the loader runs every destructor whether anything was closed or not. Both
halves fail on the old code.
A let-bound local is its own name under lldb now, and a redefinition
module carries DWARF when the daemon was asked for it.
Resolved against the println track in session.ml: the thunk keeps the
render walk's appended slots and gains the names beside them, the walk's
own scratch having none to keep.
Emit.redefinition has taken ~debug since it was written and was tested
with it; Session.eval never passed it, so every body installed by C-c C-c
lost its debug info in the running process.
Passing it alone would have been half a fix. Build.shared is what forces
-O0, and dev.ml built modules at -O2, so the llvm.dbg.declares would have
been emitted and then deleted by mem2reg: a line table, and no locals.
And a module with DWARF loaded into a host without it lines up against
nothing. So it is one flag — flan dev --debug and flan reload --debug —
and it sets the host build, the module builds and the emitted metadata
together. Off by default: a debug build is an -O0 build, and quietly
making every reloaded body -O0 changes the frame time of the one function
you are iterating on, in the loop whose point is watching that number.
What a dlopen'd module does to a breakpoint, measured against the reload
fixture rather than reasoned about:
- lldb reads the new module's DWARF on the dlopen and says so: "1
location added to breakpoint 3".
- A breakpoint set by NAME gains a second location either way, so
dlopen was never the difficulty. What the line table buys is that it
stops with source instead of disassembly.
- A FILE AND LINE breakpoint on the new body resolves only with it;
without, it sits at locations = 0 (pending) forever.
- A FILE AND LINE breakpoint on the HOST's copy stays pinned at
locations = 1. That is correct, not stale: the old body is still
mapped and every call site that has not gone through its cell again
still reaches it.
- The stack crosses intact — a frame in the reloaded .so and the one
below it in the host each name their own .flan file.
(lldb) frame variable
(long) step = 10
(long) prior = 11
The transcripts are in flan-dape.el, replacing the note that said the
module carries no DWARF yet.
flan-cnr.el's stack pane was refusing for the wrong reason. DWARF was
never its gap; nothing is attached to the stopped program, and a socket
cannot read another process's frames. Reworded to say that.
Source interleaving in the disassembly buffer is unblocked and not done:
objdump -dS interleaves a --debug module's Flan source correctly, so
Dev.asm_of needs the -S and a parse_listing that tolerates source lines.
Two frames offering `retry` put both on the break loop's list and only the
inner one within reach: §4's walk takes the first frame offering a name, by
definition, so the outer clause was drawn, offered, and unreachable. The old
prompt showed `retry` twice and sent the string either way. An index is the
only thing that can say which one, which is why SBCL identifies them
positionally too.
An index is worthless against a stack that moves, though, and this one moves:
the break loop is the poll loop, so every restart-case an evaluation enters
pushes and pops the same global list between the listing and the choice. So
the list is read once on entry and copied — names into the agent's own buffer,
frames as the addresses a transfer carries — and every answer comes from that.
The name still travels with the index as a receipt, checked against the
snapshot and refused if the two have drifted, so a bare integer can be wrong
out loud.
And the third state. A restart below the thunk a break is inside was accepted,
announced, and silently not taken: `flan_reload_call` holds its own transfer
channel and drops it on return, so the unwind stops at the thunk. The boundary
is now recorded where it is made, at the call — frames a restart-case inside
the thunk pushes are above it and still work — and such a restart is listed,
marked, and refused with the reason.
`break.flan` grew the shadowed pair, and 900 is a value no by-name lookup in
that file can produce.
A package handed over its .c files and its `link` arguments the moment it was
imported, whatever the importing program did with it. That is what made sand's
two halves two files: anything naming vendor:raylib linked libraylib on every
target, and on wasm32 that link cannot succeed, so the headless run could not
so much as mention the package the interactive one needs.
Reach.link answers it from the checked program instead. Start at main and at
the globals that run before it, follow every call — including the Handled
frames, where a lifted handler clause is reached by address and by nothing
else — and keep what is reached. A package none of whose externs survive
contributes no C and no linker argument.
Dropping the flags alone would only move the failure: the bodies that called
into raylib would still be emitted, and wasm-ld would fail on the symbols
rather than on the argument. So the same walk prunes the functions and externs
too. Only those — globals, structs and unions stay, because an unreferenced
global is bytes in BSS and a dropped one is a silently different program.
Dev builds keep everything. What a REPL may redefine next is not a function of
what has been called so far.
spec-conditions.md §2, and the reason the transfer was worth building. An
unhandled error runs a hook instead of rt_die(), on the frame that erred with
nothing unwound, lists the restarts between there and the top, and waits.
A hook rather than a direct call because the loop lives in vendor/agent, which
is an optional package, and flan_rt.c is the release runtime - a program with no
agent leaves it null and dies the way it always did. The hook resumes by writing
a restart into the transfer channel, which is the channel an invoke-restart
writes and reaches the same guard, so choosing from the break loop and choosing
from a handler are one act lowered once. §6 needed no change.
The break loop is the poll loop, run from the error rather than from the frame
boundary. That is load-bearing: an expression evaluated while stopped is a
module the listener queues and the game thread runs, so a loop that did not
drain that queue would hang C-x C-e exactly when it is wanted most. Installing
while stopped is allowed, which contradicts the rule that a redefined function
must not be swapped while it is on the stack - that rule is about mid-frame
consistency and there is no frame in progress here. The old body keeps running
and a retry reaches the new one through the cell, which is the whole point.
A restart frame carries its name now, beside the hash. Matching never needs it;
showing someone their choices does, and nothing at run time can turn a hash back
into a name.
A choice is checked on the listener thread against a stack the stopped game
thread is holding still. Answering ok and finding out on the game thread that
nothing offers that name would report success for something that cannot happen.
The test errors twice and takes a different restart each time, so a loop that
always resumed the same way fails it.
vendor/agent/flan_agent.c calls flan_dev_result_get, which lives in flan_dev.c,
which build.ml compiled only for a dev build - so flan build sand.flan died at
the link with an undefined symbol. A regression from 7ce1d09, where C-x C-e
gave the agent a result to report.
A package's C sources are collected whatever main does, so the agent's C is in
every build that imports it. flan_dev.c is now compiled into all of them.
Nothing in a release build reaches it: the compiler emits a registry lookup
only for a name the host was not built with, and without cells there is no such
name. The table is BSS, so the cost is address space rather than binary size,
and -rdynamic and the cells are still what --dev means.
test_agent.ml now links the same program both ways. It runs only the dev one -
with no cells the agent refuses every module, so linking is the whole claim.
Everything so far installed one module. The daemon's job is N of them against
one long-lived session, and that is where a registry that hands out fresh
storage per module would show up. So the agent test now takes two: the first
introduces a global the process was never built with, the second only reads it.
1007 rather than 7 is the whole assertion.
Getting there needed stdout to be line buffered, set in flan_rt_init. The C
default when stdout is a file or a pipe is a 4K block, so a program running for
minutes with a REPL attached shows nothing until it exits, and a test driving
one cannot see its progress at all - which is how this was found. One write per
line instead of per 4K.
Also written down: flan reload builds a fresh session from source each time, so
if the program file was edited since the process launched, its idea of the
host's names and memory describes a binary that is not running. That is a limit
of the command, not of sessions. And Session.eval's origin defaults to <eval>,
so the daemon has to pass the editor's real buffer path or errors point at a
file that does not exist.
lib/session.ml holds the declarations a running process was built from plus
every change accepted since, which is what an editor needs and what a one-shot
compiler cannot have.
Transactionality came for free. Check.program builds a fresh environment from a
declaration list on every call, so a form that fails to check mutates nothing
and the accumulated list is simply not replaced - no scratch-environment
machinery, which is what I was about to build. Re-checking the whole program
each evaluation costs the frontend, under 10ms, less than the llc after it.
There is a test for the case that matters: a typo, then a good form, in the
same session.
Which names the process was built with comes from the checked program, not from
any accumulated AST, because Check.program prepends the prelude and no AST
contains it. Derive it from declarations and print-line reads as new, gets a
registry cell nobody publishes, and the first call jumps to null.
Three changes are refused with a reason rather than loaded. A function's
signature, because a cell is a bare ptr and every call site compiled before the
change still passes the old arguments through it. A global's type, because the
storage exists and has a shape - reusing it reads at the wrong offsets, and
replacing it discards the state the reload exists to preserve. A struct's
fields, because the values the process is holding have the old layout. Note
what the checker already catches on its own: change a parameter type and the
caller fails to type check first, loudly. These rules only get a turn on a
change the checker accepts, which is a name nothing else in the program uses -
exactly where the silent version lives. Hence an unused defvar and a C-called
defn in the fixtures.
The accumulated list is the post-Load one, so an evaluated import is spliced as
its expansion. Otherwise re-evaluating a file that imports something appends a
second import, Load expands it again, and the duplicate-name pass rejects it.
C-c C-k on sand.flan's own text is the test.
flan reload now takes a program and a file of changed forms rather than a list
of function names and a --new list: the session works out which names are new,
which is the thing a bare CLI could not.
Also fixed, found by running the agent test under load: the agent took SIGPIPE
when a sender read part of a reply and closed. Replies go out with
MSG_NOSIGNAL, per call rather than by installing a handler, because the signal
disposition belongs to the program the agent is embedded in.
vendor/agent/ is a package like any other - agent.flan declares three calls,
flan_agent.c implements them, link asks for -lpthread. start listens on a unix
socket, poll installs whatever arrived and says how many, wait does the same
after waiting for something.
The split between poll and the listener is the whole design. dlopen relocates a
module and takes the loader lock, which is milliseconds and unbounded, so it
happens on the listener thread. flan_reload_install is one store per function
and must not land while a redefined function is on the stack, so it happens on
the game thread at the top of the frame, when the program asks. A ring and two
atomics connect them; the game thread never blocks on the loader.
wait exists for tests. A test that races the frame rate fails on a loaded
machine, so test/programs/agent.flan waits for the reload rather than sleeping
past it. It also sends a junk path first: the daemon is a separate process and
can send anything, and a bad path must be refused rather than take down the
program it was sent to.
Two things came out of running it. The reply goes out before the module is
queued, because the other way round the game thread can install and the program
can exit between the two, and the answer reaches the sender as a connection
reset instead of as ok. And ok means queued, not installed - the sender does
not get to know when the swap happened, since only the program knows when it is
between frames.
sand.flan now polls at the top of its loop, which is what this step was for.
Under Xvfb, one line on the socket and 455 consecutive frames drew from a
game-draw that did not exist when the process started. Building without --dev
still works: there are no cells, so a module is refused on the listener thread
and the loop never notices.
flan reload builds one module the way the daemon will. --new names what the
host was not built with, which is the one thing the command cannot work out for
itself and exactly what the session will track.
